Model No.︰HD-CTS2-02J
Brand Name︰HD
Country of Origin︰China
Unit Price︰US $ 25000 / pc
Minimum Order︰1 pc
Two areas Thermal shock testing chamber
This chamber is designed to test samples for thermal impact of high and low temperatures by sharply dropping, in order to detect not only defects, but also to determine the operational durability and reliability of samples. Basket quickly moves from the cold to the hot zone and back, from one zone to another, is no more than 10 seconds.
Model |
HD-CTS2-01J |
HD-CTS2-02J |
HD-CTS2-03J |
||
Basket volume |
48 L |
120 L |
190 L |
||
Basket dimensions (D*W*H) |
300*450*350 mm |
500*600*400 mm |
600*700*450 mm |
||
External dimensions (D*W*H) |
2250*1300*1950 mm(approximately) |
2750*1200*2000 mm(approximately) |
2350*1640*2640 mm(approximately) |
||
High temperature area
|
Temperature exposure range |
+60...+200℃ |
|||
Preheating temperature upper limit |
200℃ |
||||
Heating time |
R.T...+200℃: 40min (approximately); |
||||
Low temperature area
|
Temperature exposure range |
0...-75℃ |
|||
Precooling temperature lower limit |
-75℃ |
||||
Cooling time |
R.T....-70℃: 60min (approximately) |
||||
Basket
|
Temperature range |
-65...+150℃ |
|||
Temperature fluctuation |
≤1℃ |
||||
Temperature deviation |
≤±2℃ |
||||
Conversion time |
≤10 seconds |
||||
Temperature recovery time |
≤5 min. |
||||
Material |
|||||
Shell material |
Cold rolled sheet steel, spray plastics on surface |
||||
Internal material |
Stainless steel |
||||
Thermal insulation material |
Polyurethane foam +glass wool |
||||
Refrigeration system |
|||||
Refrigeration mode |
Mechanical compression, two-stage refrigeration |
||||
Cooling mode |
Water cooling |
||||
Compressor |
Imported compressor |
||||
Temperature sensor |
Pt100 |
||||
Controller |
Programmable logic controller, 7’’ LCD touch screen |
||||
Power supply |
AC380V 50Hz, Three-phase four-wire + earth wire |
Payment Terms︰ TT