Product Description

Electric blast drying oven

Application:

  Applicable to electrical, electronics, instrumentation, materials, medicine and other scientific research, production units, mainly used for drying, baking, heat treatment, disinfection, insulation and other temperature tests.

 

Features:

1. Internal tank of drying oven is made of stainless steel, and is manufactured by argon arc welding process. Silicone rubber seals and mechanical locking devices effectively seal the test chamber. The shell of the drying oven is made of cold rolled steel sheet, and the double sides electrostatic epoxy polyester powder is sprayed at 180℃ for curing. The gap between the test chamber shell and the test chamber is filled with centrifugal glass wool felt to achieve the lowest heat loss.

2. Customers can adjust the height of the shelf as needed to make more efficient use of space.

3. Forced air convection duct structure; the air duct is located on the lower side of the oven, and the control cabinet is located at the bottom of the oven.

 

Security:

  Have independent over temperature protection device, to ensure safe operation.

 

Technical parameter:

Model	HD-2007	HD-2010	HD-2020
Internal volume	72 L	140 L	240 L
Internal dimensions (D*W*H)	400*450*400 mm	500*550*500 mm	600*650*600 mm
External dimensions (D*W*H)	580*610*900 mm	680*710*1020 mm	780*810*1180 mm
Performance
Maximum temperature	+260℃
Minimum temperature	Room temperature +20℃
Heating time	Room temperature...+260℃ ≤ 90 min
Temperature fluctuation	≤±0.5℃
Temperature uniformity	≤±2.5%
Controller	Digital temperature controller, with self tuning PID function;
Heater	Nickel-chromium heating wire
Power	AC 220V
Power supply	1.8 kW	2.7 kW	3.6 kW
Noise	68 dB(A)	68 dB(A)	68 dB(A)

Payment Terms︰ TT

Product Image