Three zones Thermal shock testing chamber
This chamber is designed for cyclic climatic tests, to test temperature resistance of samples in a rapid temperature change.
The design of this chamber includes:
² High temperature zone;
² Testing (working) area;
² Low temperature zone.
The working area of this chamber is fixed, and equipped with dampers for supplying hot and cold air. Samples for testing are placed in the working area. Use damper to supply hot and cold air to change the temperature of the working area in a very short time.
|
Model
|
HD-CTS3-1J
|
HD-CTS3-2J
|
HD-CTS3-5J
|
HD-CTS3-10J
|
|
Internal volume (L)
|
120 L
|
210 L
|
504 L
|
900 L
|
|
Internal dimensions (D*W*H)
|
400*500*600 mm
|
500*600*700 mm
|
700*800*900 mm
|
900*1000*1000 mm
|
|
External dimensions (D*W*H)
|
1620*1460*
2360 mm
|
1720*1560*
2460 mm
|
2120*1820*
2260 mm
|
2420*2020*2660 mm
|
|
Preheating area
|
Preheating temperature upper limit
|
200℃
|
|
Heating time
|
R.T.~+200℃: 40min (approximately)
|
|
Pre-cooling area
|
Pre-cooling temperature lower limit
|
-75℃
|
|
Cooling time
|
R.T.~-70℃: 90min (approximately)
|
|
Working area
|
Temperature shocking range
|
High temperature: 60℃～+150℃;
Low temperature: -55℃～-10℃;
|
|
Temperature fluctuation
|
≤±0.5℃
|
|
Temperature deviation
|
≤±2℃
|
|
Temperature recovery time
|
≤5min
|
|
Material
|
|
Shell
|
Cold rolled sheet steel, spray plastics on surface
|
|
Internal material
|
Stainless steel
|
|
Thermal insulation material
|
Polyurethane foam + glass wool
|
|
Refrigeration system
|
|
Refrigeration mode
|
Mechanical compression, two-stage refrigeration
|
|
Cooling mode
|
Water cooling
|
|
Compressor
|
Imported compressor
|
|
Controller
|
Programmable logic controller, 7’’ LCD touch screen
|
|
Power supply
|
АС380V, 50Hz, Three-phase four-wire + earth wire
|
